Datsun Roadster Electric Fan Conversions 1600 & 2000
Heavy-duty industrial grade electric cooling fan14-inch heavy duty power fan utilizes state-of-the-art technology to offer maximum efficiency with low-amp draw and reduced noise. Its unique, swirl, blade allows it to act as a puller fan with no performance loss. Pulls 2000 CFM. Comes with hardware kit, sensor, etc. Special note: these fans were originally produced for use on farm equipment tractors and are superior to their automotive counterparts. Compare this to any Hayden or off-brand electrical fan from Auto Zone or other retail outlets.
NOTE: Use of this fan in a 2000 requires some modifications during the installation procedure. The horizontal radiator support brackets need to be spaced approximately 3/4 of a inch from their normal mounting point. Longer bolts are required as well. Spacers and the proper bolts are included with the 2000 conversion. The space is necessary to clear the shaft on the water pump. In addition, the front air scoop will no longer line up with and bolt to the flange on the radiator. No modification is required for the early or late 1600 or 1600 motors stroked to 2000.
ALTERNATE BOLT IN MODEL FOR 2000: Order by PART NUMBER: 1273A Medium power, 1500 CFM, straight bladed electric fan. A bit nosier than the swirl blade documented above however less work is required to bolt this unit in.