here,to view this part.Precesion Laser cut .500 1/2 thick top plate flange 1 1/2 diameter tubing. Also note that our gaskets are not the typical paper thin non composite gaskets often supplied with headers. NOTE: Use of a header on all 1600's requires a change to the shorter U20 starter or the shorter gear reduction starter. Some 1600's have already been converted to a shorter starter. Please check yours before ordering. Click here,to view the gear reduction starter.">
ImagesCategoriesDescriptionPrice

 Exhaust
 Partnumber: 1895
Datsun Roadster 1500/1600 Thermal Coated Header 1/2 inch flange 1 1/2 dia tube

DELUXE VERSION - 1600 Thermal Coated Header



Excellent quality. Precesion holes and mounting. Increases performance.Thermal-Coated Headers. Also known as jet hot coatings or ceramic coating. These coatings keep the engine cool to improve performance



Our .093 3/32 thick metal sheathed heavy duty composite intake/exhaust manifold gasket (part #1286)and (#1707) collector gasket both come with this package.



Manufacturer has approved the coating up to heat cycles as high as 2100 degrees farenheit. Obviously, your exhaust should never get this hot. Threshold of ceramic coating failure is so far above normal operating tempature that long life and greater durability is assured and benefits over other coatings operating at lower marginal tempature levels. Thermal coated Collector and bolt kit included. Optional flex-pipe available separately. Click here,to view this part.



Precesion Laser cut .500 1/2 thick top plate flange 1 1/2 diameter tubing. Also note that our gaskets are not the typical paper thin non composite gaskets often supplied with headers.

NOTE: Use of a header on all 1600's requires a change to the shorter U20 starter or the shorter gear reduction starter. Some 1600's have already been converted to a shorter starter. Please check yours before ordering. Click here,to view the gear reduction starter.		 $254.00
Copyright © 2007 DatsunParts.com. All rights reserved.