No need to buy an $17.00 radiator cap any longer. Our new gasket replaces the old worn out one on your cap. Just pull it off and glue the new one on. Just want to buy a new cap click here to view this part.

Made of thermal rubber not cork. Seals better and lasts longer. Stop that annoying leak. Need a new cap? Click here to view this part.

Never replace a oil soaked cork gasket again. 3/8" thick, 40 Durometer soft, so it will compress and seal for those of you with a little warp on top you haven't taken care of as yet. Apply with common " Gasket-Cinch " or Permatex 3H form a gasket. This gasket is also included in our premium gasket kit. Click here, for stock cork gasket.

NOTE: Be sure to reference the correct side of the gasket to the valve cover 1st before applying the glue. Rough up and clean the surface to be attached to the bottom of the valve cover.

The most complete, highest quality sets in the industry. We include gaskets and parts even the factory left out.

These deluxe gasket sets are hand built with genuine Nissan parts or superior custom made gaskets where applicable. We have tooled and remade a number of the gaskets in the photo and created them in heat resistant Nitrile rubber or newer composite material. Thicker than original many of these gaskets qualify as re-usable. A Brass freeze plug kit is included with both sets as well.
Sets are specifically built to year so please specify so you'll get the correct gaskets for your engine. List of gaskets: Here is a description of the gaskets contained in the 2 listed kit numbers below. Please click the thumbnails to view which gaskets come in each kit. .093 metal sheath composite Int/Ext, 6 - block freeze plugs, 1-cam plug, fuel pump phenolic w/gaskets attached, 3-early thermostat housing, 2 - late thermostat housing, distributor housing, distributor o-ring, .125 nitrile/cork oil pan, inner water pump, outer early water pump, 2 - outer late water pump, oil pump, 2 - R16 Nitrile rubber re-usable carb to air filter, 4 - .062 carb phenolic, 3 -hole header collector, cork timing cover, timing cover seal, Head gasket, 8 early valve seals, 8 - late valve seals, .375 heat resistant Nitrile re-usable valve cover, radiator cap, oil filler cap, 2 - valve cover grommets, oil filter housing, lower tensioner, oil pan nut washer, 2 -side bearing cap, 2 - premium rope seals.

65 - 67 Version $285.00 Order by PART#1324E

67 1/2 - 70 Version $331.00 Order by PART#1324L

Interested in only the Nissan versions of these kits? Click here for the early 1600 Nissan Gasket set and click here for late 1600 Nissan Gasket set.<

The most complete, highest quality sets in the industry. We include gaskets and parts even the factory left out.

These Deluxe gasket sets are hand built with genuine Nissan parts or superior custom made gaskets where applicable. We have tooled and remade a number of the gaskets in the photo and created them in heat resistant nitrile rubber or newer composite material. Thicker than original many of these gaskets qualify as re-usable.

Head gasket has a rear oil gallery and front sealing material often not present on other gaskets. A Brass freeze plug set is included in both sets as well.

Sets are specifically built to SU or SOLEX Versions. So choose from the part numbers below to suit your engine

List of gaskets:
Parts break down of all the gaskets included in both kits. Click the thumbnail of each photo to see which gaskets come with each kit: .093 metal sheath composite Int/Ext, 6 - block freeze plugs, 1-Jack shaft plug, 4 - .062 SU carb insulator block, 2 - Nitrile re-usable SU Carb to air filter, 4 - Solex inner carb insulator, 4 - Solex outer carb insulator, .125 Nitrile/cork oil pan, inner water pump, fuel pump phenolic with gaskets attached, outer water pump, distributor o-ring, distributor housing, oil pump, 3 hole header collector, 2- Solex Carb to Air filter, inspection cover, oil filter housing, 2 - thermostat housing with metal ground strap, 2- timing cover, front timing cover seal, up tensioner, oil pan nut washer, rocker cover hose fitting, head gasket, valve cover gasket, 8 - valve stem seals, 2 - Solex water tube, radiator cap, nitrile oil filler cap, 2 - valve cover grommets, 2 - lower tensioner, 2 - side bearing cap seals, 2 - premium rope seals. Solex Carb insulators as well as Su phenolic block gaskets.

Lots of extras just like our full engine sets featuring re-usable nitrile heat resistant rubber gaskets. Note: our int/ext gasket in this kit can be used with the stock exhaust manifold. Just remove the center web.

Here are your gaskets as pictured: .093 metal sheath int/ext, cylinder head, rubberized cork valve cover , nitrile rubber heat resistant re-usable valve cover, 8 - valve stem seals, nitrile rubber oil cap, nitrile radiator cap .093 metal sheath 3 - hole collector for header, 4 - hole top thermostat housing, 2 - hole bottom thermostat housing, 4 - .062 carb phenolic block, 2 - nitrile rubber carb to air filter, 2 - valve cover grommets.

Lots of extras just like our full engine sets featuring re-usable nitrile heat resistant rubber gaskets.

Note: our re-usable int/ext gasket can be used with the stock exhaust manifold..just remove the center web.

Here are your gaskets as pictured: .093 metal sheath int/ext, cylinder head, rubberized cork valve cover , nitrile rubber heat resistant re-usable valve cover, 8 - valve stem seals, nitrile rubber oil cap, nitrile radiator cap, .093 metal sheath 3 - hole collector for header, 1 - 3 - hole top thermostat housing, 2 - 3 - hole bottom thermostat housing, 4 - .062 carb phenolic block, 2 - nitrile rubber carb to air filter, 2 - valve cover grommets.

To order this gasket set with the thicker R16 head gasket instead of the stock thickness Order by PART# 1331T $213.00

Lots of extras just like our full engine sets featuring nitrile heat resistant rubber gaskets.

Here are your gaskets as pictured: Premium cylinder head with sealing material front and back, .093 metal sheath composite int/ext, .093 3 hole collector for header, valve cover, inspection cover, PCV fitting, upper tensioner, 8 - valve stem seals, 2 - valve cover grommets, Nitrile rubber oil cap, nitrile radiator cap, 2- thermostat housing with metal ground tab, 4 - .062 phenolic, 2 - Nitrile rubber carb to air filter. Carb phenolic block gaskets

Lots of extras just like our full engine sets featuring nitrile heat resistant rubber gaskets.

Here are your gaskets as pictured: Premium cylinder head with sealing material front and back, .093 re-usable metal sheath int/ext, .093 3 hole collector for header, valve cover, inspection cover, PCV fitting, upper tensioner, 8 - valve stem seals, 2 - valve cover grommets, Nitrile rubber oil cap, nitrile radiator cap, 2- thermostat housing with metal ground tab, 4 - rear carb insulator phenolic 4 - front carb insulator phenolic, 2 - carb to air filter.