Datsun Roasdster 68-70 Braided Oil Pressure Gauge Hose
AFTER MARKET USA
Custom machined fittings specifically made, matching exactly to the original Nissan fittings. (SEE PHOTO) Made by an aerospace firm here in Los Angeles. Compare our line to the factory line in the photo. No extra fittings/coupling, leak points to adapt one stock part to another.
If we were going to make a just few lines we might have gone the easy route and use a bunch of generic readily available Aeroquip lines, but we wanted a solid line and one that looks like the original.
Clean, exact replica, lots of diligence to make it right as opposed to a throw together, quick buck, budget off brand line product...no here not ever!
Here's a product that has merit. 800 sold over 14 years. Shop & Compare. Let your own eyes compare and make the decision for you!!
68-70 Replacement braided oil pressure gauge hose. See original Nissan in foreground. Correct and exact reproduction fittings exclusively made for Datsun Parts. Frame end fitting M10 by 1.25, block end fitting 1/8 BSPT - that is British NOT American pipe thread. No longer necessary to by other generic stainless lines and tap out the block for American 1/8 fittings or take a chance rebuilding your old line with the possibility of line failure! This is the real deal. Properly machined and accurate frame end fitting to engage the frame rail stand-off and keeper. Pre-tested to working pressure of 3000 PSI. Way overkill as this hose will never see any pressure anywhere near this figure. Flexible.....won't kink or break. Check out what the regular Nissan hoses are selling for. Click here, to view this part.